Liva Soil Resistance Test and Monitoring Device

Liva Earth Resistance Tester and Tracking Device is a measuring instrument designed to measure and follow the Earth (Transition) Resistance.

The device can make instant measurements with the Mobile Use Option and record these measurements in its memory. In addition, with the Fixed Use Option, it can continuously measure ground resistance and data monitoring / recording.

Properties and Uses:

Measurement values of Liva Earth Resistance Tester and Tracking Device are displayed on the LCD screen.

The device can be used to make instant measurements of the grounding transition resistance and / or to receive continuous information on the grounding transition resistance in circuits / networks where the grounding systems are required to be monitored continuously, to follow the statistical data of this information and to immediately notify any malfunction that may occur in the grounding system.

The device works with 1 replaceable 3.7 volt battery. Depending on demand, its battery can be charged with an external adapter or it can be continuously operated with an external battery.

The operating range of the device is 0-400 Ohms and it can measure with 1% accuracy.

With its Fixed and Mobile usage options, the device can perform grounding resistance measurement and data tracking / recording for instant and / or monitoring.

The device's own program should be installed on a Windows-based computer for date / time settings, data and statistics tracking, SMS and / or e-mail sending settings and relay limit settings of the Liva Earth Resistance Tester. The device provides connection via TCP / IP and USB over the program installed with the computer. With the connection established, the management of the device, its settings and the monitoring of the measured data can be made.

Below is the Liva Earth Resistance Tester and Tracking Device PC Interface.

The device is designed to store the records of the measurements made in its own memory. In addition, the values / data measured by the device are recorded in its memory together with the time and date information in ten (10) minute intervals.

Measurements can also be recorded / transferred to the computer through the software of the device installed on the computer.

Operation:

There are three (3) test sockets on the front of the Liva Earth Resistance Tester. With these sockets, the system and reference electrodes for which earth resistance will be measured are connected to the test sockets.

Within the scope of the data requested from the device, Ethernet Socket, USB Socket, Relay Output Sockets and Power Supply Adapter are connected to the device.

In the Fixed Use option, two different values can be set. In case of exceeding the set limits, it can send notifications in the form of e-mail or SMS to e-mail addresses and mobile phone numbers that can be recorded in the device memory. It can also run different circuits with relay outputs.

The measurements made in the mobile use option are recorded in the device memory.